SUPER8 AIR PURIFIER - Today's essential choice for refreshing quality clean air
| Super Plasma Germicidal UV energy can be effective in killing biological contaminants such as mold/fungi, bacteria and viruses. Super Plasma germicidal lamp is safely placed inside air handling ducts, which with sufficient dosage, can create a chemical reaction that alters the structure of microorganisms and "kills" them by destroying their ability to reproduce and colonize.
Two blades of zigzag pointers generate countless negative ions. Studies have shown numerous proofs of how negative ion improves and elevated human health. Negative ions also help freshen and purify the air caused by allergens such as pollen, mold spores, dust and animal dander floating in the air which have either a neutral or a positive charge to be attracted to and stick to each other, forming ‘clumps’ because opposite charges attract. These clumps of particles then become heavy enough so that gravity can pull them down to the floor, where they can be vacuumed up, rather than staying in suspension where they can be breathed in and cause allergic reactions.
| The array of three Stainless Steel Dust Collection Blades have significantly enhanced Super Plasma air cleaning systems. It is more effective and economical than the other air purifiers. Their stronger electrostatic field means airborne pollutants are captured more aggressively than others between the three oppositely charged collection blades.
Plug into the nearest power socket. Press the ON/OFF button to initiate operation and the LED turns solid blue. Press the ON/OFF button again to turn off the air purifier.
Cleaning and Maintenance
Turn off and unplug the air purifier from the electrical power source before cleaning.
Clean the dust collector and the metal pointers every one or two weeks or whenever there is unusual sound during operation.
Otherwise, the efficiency of the unit will be effected due to excessive dust on the collector. In general, a thorough cleaning will resume the unit to normal operation.
Cleaning the Dust Collector
Remove the Dust Collector by pressing the buttion at the top. Use mild detergent to wipe off the dust from each of the collection bars, then rinse with clean water and dry thoroughly. Wait until the dust collector is completely dry and then put it back into the unit. The dust collector is not entirely inserted into the unit until a "click" sound is heard.
Cleaning the Metal Pointers
After a certain period of time, the zigzag-shape metal pointers that release negative ion will accumulate dust and dirt that will lower the efficiency of the appliance. Please clean the metal pointers whenever the dust collector is cleaned.
Two cleaning plates with springs are provided at the top part of the dust collector. To clean the metal pointers using the cleaning plates, hold the top button of the dust collector and then repeat the process of pulling the dust collector out and pusing it back. The cleaning plates will scrape off the dust on the metal pointers as you move the dust collector up and down.
Cleaning the Appliance
The interior of the appliance also accumulate dust. Before putting the dust collector back after cleaning, invert the entire unit for a few times to get rid of the accumulated dust.
The exterior of the unit can be cleaned using mild, non-abrasive cleanser and a soft cloth.
Do not allow any liquid to enter the unit. Wait until the unit is completely dry before use.
Replacing the UV Lamp
UV Lamps are effective for about 8,000 hours (about 12 months). Replace earlier if there is no "blue glow" inside the housing.
Remove the cover by lifting up the cover and sliding upwards. Softly turn the UV Lamp and slide it from its fixture. Replace with a new lamp of the same model.
Recommend : MAJOR CLEANING ON EVERY SIX (6) MONTHS.
In case of malfunction, please contact 603-7982 0293 or send to services and maintenance center for services.